Absinthium Water Cooler

Here's another component that might add some interest...

As part of the water reservoir there could be a refrigeration section that cools the water.

An "old fashioned" mechanical, air heat pump could chill the water. This would need to be "pumped down" significantly before use. I would need a second power section, possibly a chain driven section on the opposite side.

The idea here is that when setting up a "minion" could spin the cooler section at fairly high speed to drop the temperature in a brine container as close to zero as possible.

Then as the Absinthe is prepared the water being dispensed would pass through a coil in the chilled brine.
A temperature gauge on the brine container would indicate when it needs to be pumped down again during use.

Keep your sightglass full, your firebox trimmed and your water iced.
KJ

Click here to see the other Absinthium posts.